January 30, 2024

Surgical robot developed at Nebraska launches into space

The Nebraska-built surgical robot is among a number of scientific experiments being delivered to the International Space Station after the successful liftoff of NASA’s NG-20 cargo mission on Jan. 30. The Northrop Grumman Cygnus spacecraft, shown here at liftoff atop a SpaceX Falcon 9 rocket, is expected to arrive at the station on Feb. 1. The surgical robot will be tested in the coming weeks.
NASA

NASA
The Nebraska-built surgical robot is among a number of scientific experiments being delivered to the International Space Station after the successful liftoff of NASA’s NG-20 cargo mission on Jan. 30. The Northrop Grumman Cygnus spacecraft, shown here at liftoff atop a SpaceX Falcon 9 rocket, is expected to arrive at the station on Feb. 1. The surgical robot will be tested in the coming weeks.

A surgeon’s hands could stretch 250 miles above Earth, should an upcoming test of a miniaturized surgical robot aboard the International Space Station prove successful.

Invented by Nebraska’s Shane Farritor and others, the robot blasted off Jan. 30 from Florida’s Cape Canaveral Space Force Station aboard a Northrup Grumman Cygnus spacecraft bound for the orbital laboratory. The Cygnus was carried by a SpaceX Falcon 9 rocket.

It will be the first surgical robot on the space station and one of the first times remote surgery tasks have been tested in space.

The mission will help identify the next steps for creating surgical technologies suitable for long-distance space travel, but it also has implications for health care here on Earth.

“While space travel is exciting to think about, there is also an immediate need on Earth to help patients get the care they need,” said Farritor, Lederer Professor of Engineering at the University of Nebraska-Lincoln and chief technology officer for Virtual Incision, a startup company he co-founded to bring the miniature robot to the commercial market.

According to a 2018 report published by the American College of Surgeons, about one-third of U.S. counties lack a surgeon, despite half of those counties being home to a hospital. Research from the University of Washington showed that availability of surgeons in rural areas declined by more than 29% between 2001 and 2019.

“Remote surgery has the potential to address these issues so patients can get the health care they need,” Farritor said.

Rachael Wagner and Shane Farritor look over a robotic surgery device in the Virtual Incision facility.
Craig Chandler | University Communication and Marketing
Rachael Wagner and Shane Farritor review a robotic surgery device in the Virtual Incision facility.

Farritor and his team have been preparing a space-worthy version of their robot, named MIRA, for Miniaturized In vivo Robotic Assistant, for about two years.

The vision for MIRA is to perform surgery in remote areas, whether space, military battlefields or rural areas where no doctor is at hand.

NASA provided a grant through the Established Program to Stimulate Competitive Research (EPSCoR) in summer 2022 to begin preparing MIRA for an autonomous test aboard the Space Station. In 2023, NASA awarded an additional grant, also through EPSCoR, to allow the testing to attempt remote guidance from the ground in Lincoln, Nebraska.

In an experiment to take place in coming weeks, a Lincoln surgeon who has assisted with previous tests of the device will guide spaceMIRA as it uses both “hands” to perform a surgical simulation. The tasks mimic surgical tissue with tension that allows a dissection to be performed. Riding inside an experiment locker the size of a microwave oven, spaceMIRA will use its left arm to grasp, and its right arm to cut, much like a human surgeon in a hospital operating room.

“The two-handed approach is critical in surgical procedures because local tension is key to determining the ideal locations to resect and to cut in the desired way,” Farritor explained.

Doctoral student Rachael Wagner of Lincoln and master’s student Victoria Nelson of Sioux City, Iowa, spent a week at the Marshall Space Flight Center in Huntsville, Alabama, working with NASA engineers to evaluate the robot before it joined the payload for delivery to the International Space Station.

Sean Crimmins, a senior mechanical engineering major, loads the robotic arm into its case before a shake test.
Craig Chandler | University Communication and Marketing
Sean Crimmins, a senior mechanical engineering major, loads the robotic arm into its case before a shake test. The arm and case were tested at Lincoln’s NCEE Labs.

“There is a bunch of testing required for NASA to make sure the payload is safe and meets all their requirements,” said Wagner, who serves as engineering lead for the project. “There are also tests to assure ourselves the hardware is up to snuff — that it can survive the launch and work on orbit.”

Originally, spaceMIRA was to be pre-programmed to perform surgery-like tasks without human involvement for this experiment. The ground-control element adds an extra layer of difficulty to MIRA’s mission. Latency — the delay that occurs while awaiting a signal to travel from the Earth to the International Space Station and back — is one of the biggest. Even a half-second delay could cause problems.

“There’s lots of obstacles,” Farritor said. “As we’ve learned recently, it can be hard to get the Zoom conference room to work right — let alone this.”

Farritor and his colleagues began developing MIRA nearly 20 years ago. Since its founding in 2006, Virtual Incision has attracted more than $100 million in venture capital investment. Previously located at Nebraska Innovation Campus, the growing company is now located at 1501 Old Cheney Road in southwest Lincoln.

Farritor’s team will receive data about the robot’s performance during the space station tests before MIRA returns to Earth in its locker later this spring. It likely will be a year or more before test results are published.

“It’s taken a lot of testing to build up to this, and we’re still a long way from telesurgery on an actual patient,” Farritor said. “The first step is to demonstrate the technology.”

Nebraska alumni and Virtual Incision employees Mark Chontos, Abby Cooper and Parker Durham cheer as the cargo supply vessel seperates from the rocket several minutes after liftoff.
Craig Chandler | University Communication and Marketing
Nebraska alumni and Virtual Incision employees (back row, from left) Mark Chontos, Abby Cooper and Parker Durham cheer as the cargo supply vessel separates from the rocket several minutes after liftoff.

High Resolution Photos

Rachael Wagner and Shane Farritor look over a robotic surgery device in the Virtual Incision facility.
Sean Crimmins, a senior mechanical engineering major, loads the robotic arm into its case before a shake test.
Craig Chandler | University Communication and Marketing
An astronaut unloads a box on the International Space Station.
A SpaceX Falcon 9 rocket with the Dragon cargo module lifts off at Cape Canaveral in December 2019.
Courtesy | NASA